Autor Tema: BY-ka v.8 RTA 22mm  (Pročitano 447 puta)

Van mreže bobpp

  • Global Moderator
  • Hero Member
  • *****
  • Thank You
  • -Given: 4984
  • -Receive: 7318
  • Poruke: 2831
  • Ugled: +8144/-0
  • Pol: Muškarac
  • elektronske cigarete
BY-ka v.8 RTA 22mm
« poslato: Januar 23, 2019, 16:06:19 »
  • Publish
  • The set includes: base with lid, air duct (having a 1.4mm airflow), air duct (having a 1.7mm airflow), air duct (having a 2.3mm airflow),  bell, transparent  flask, combi  flask, black  flask, drip type black, a set of spare o-rings and screws for racks, specials.  key for air ducts.
      At the end of the base there is a branded engraving with a serial number.
      At the base of the base there is a thread for the installation of interchangeable air ducts with various options for blowing the spiral.  Duct replacement is performed using a special key that is included in the package.
      At the base there is a blower adjustment ring.  The thrust intensity is adjusted by rotating the adjusting ring relative to the connector.  When combining the groove on the adjusting ring with a certain number of air intake holes in the connector (1, 2, 3, 4, or 5) there is a change in the force of "tightening".  The diameter of the air intake holes at the base is 1.2 mm.
      There is a stopper on the air adjustment ring for a more comfortable grip on the base of the atomizer.  The adjustment ring is removable.
      Racks on the site are milled, for convenience and the possibility of installing various types of spiral.
      The thread on the lid and the return part of the flask is many-fold, because the process of opening / closing the lid occurs quickly, in about 1/2 turn.  Attention, the thread on the cover is left.
      The platform on the base is milled, forms two baths, interconnected, for easy laying of the wick.
      The top and bottom of the base is connected with end screws.
      Adjustment of the fluid supply is carried out by turning the bell to the required angle (number of revolutions), without additional tools.  The bell is turned by fingers for the visible top part.  For convenience of fixing the position, a milled mark is applied to the bell.
    The thread on the lid and the return part of the flask is many-fold, because the process of opening / closing the lid occurs quickly, in about 1/2 turn. Attention, the thread on the cover is left.
    The platform on the base is milled, forms two baths, interconnected, for easy laying of the wick.
    The top and bottom of the base is connected with end screws.
    Adjustment of the fluid supply is carried out by turning the bell to the required angle (number of revolutions), without additional tools. The bell is turned by fingers for the visible top part. For convenience of fixing the position, a milled mark is applied to the bell.

    Ima dve velicine
    Nano - 2,8ml




    Standard - 5,1ml













    Cena izmedju ~7500 i 8500 RUB,zavisno od kombinacije ovde: https://vape-systems.ru/catalog/atomayzer_rda_caiman_v_4/





    Van mreže kinkel

    • eCiginfo prijatelj
    • Hero Member
    • *****
    • Thank You
    • -Given: 917
    • -Receive: 956
    • Poruke: 543
    • Ugled: +956/-0
    • elektronske cigarete
    Odg: BY-ka v.8 RTA 22mm
    « Odgovor #1 poslato: Januar 23, 2019, 16:46:31 »
  • Publish
  • Hmmm, pa ovo je v7 sa novim imenom v8 .. salu na stranu, ovo bi trebalo biti v7 rev.02

    Van mreže BobanNB

    • Full Member
    • ***
    • Thank You
    • -Given: 5
    • -Receive: 79
    • Poruke: 112
    • Ugled: +79/-0
    • elektronske cigarete
    Odg: BY-ka v.8 RTA 22mm
    « Odgovor #2 poslato: Januar 24, 2019, 18:59:51 »
  • Publish
  • Боље би било v7.1

    Послато са IQ1019N уз помоћ палца


    Van mreže bobpp

    • Global Moderator
    • Hero Member
    • *****
    • Thank You
    • -Given: 4984
    • -Receive: 7318
    • Poruke: 2831
    • Ugled: +8144/-0
    • Pol: Muškarac
    • elektronske cigarete
    Odg: BY-ka v.8 RTA 22mm
    « Odgovor #3 poslato: Februar 09, 2019, 20:33:00 »
  • Publish

  •