Autor Tema: SME (myevic) - firmware for Joyetech, Wismec, Eleaf  (Pročitano 1979 puta)

Na mreži ivanneko

  • Global Moderator
  • Hero Member
  • *****
  • Thank You
  • -Given: 7850
  • -Receive: 10499
  • Poruke: 7009
  • Ugled: +12934/-0
  • Pol: Muškarac
SME (myevic) - firmware for Joyetech, Wismec, Eleaf
« poslato: Decembar 17, 2017, 06:13:21 »
  • Publish
  • The look-and-feel of the myevic firmware is more-or-less identical to the original firmware, so you shouldn't be lost.
    Many new features and options are made available through the menu system; I strongly encourage you to fully read the present documentation.


    Compatible hardwares
    Joyetech
              eVic VTC Mini
    • eVic VTC Dual
    • eVic VTwo Mini
    • eVic VTwo
    • eVic AIO
    • eVic Basic
    • eGrip II / Light
    • Cuboid
    • Cuboid Mini
    • Cuboid 200
    • Evic Primo v1 / v2
    • Evic Primo mini
    • Evic Primo SE
    • WismecPresa TC75W
    • Presa TC100W
    • Reuleaux RX75
    • Reuleaux RX200S
    • Reuleaux RX2/3
    • Reuleaux RXmini
    • Reuleaux RX300
    • Sinuous (Predator) 228W
    • Reuleaux RX Gen3
    • Reuleaux RX Gen3 Dual
    • RX2 20700
    • Sinuous P80
    • Sinuous FJ200 (not full)
    • Eleaf
    • Invoke ?
    • OthersVaponaute La Petite Box
       
    Usage:The binary firmware file is included in the bin/ subdirectory of the project.If you are only interested in installing and using the firmware, download it here : bin/myevicOnce you've downloaded the firmware binary, you may:Use the manufacturer's firmware updater to upload like you would with a usual firmware update from Joyetech or Wismec:
    • Download the firmware updater package from the manufacturer Wismec or Joyetech, depending of the brand and model of your box. Be sure to pick the right software for the right box brand and model.
    • Unzip the update package and launch the UpdateFirmware.exe (Joyetech) or UpdateWismec.exe (Wismec) found in the package.
    • Plug your box into your PC via USBBe sure you use a data-capable USB cable. Some cheap cables coming with some boxes only ensures box charging. If unsure, use the cable that came with your box. Once done, the updater window should show the model and version of your box.
    • Click the "Update" button; a file selection dialog will open. Select the "myevic.bin" file.
    • Wait for the update process to complete.If something goes wrong, retry to update. Update fails sometimes; this shouldn't be a concern.
    • Enjoy.
    « Poslednja izmena: Maj 05, 2018, 20:17:13 ivanneko »
    Cekaj stani , znaci uzmem saksiju probusim rupu na njoj i ja sam moder ? Ali rupu na saksiji nisam ja izmislio znaci li onda da sam cloner ? :D

    Van mreže bobpp

    • Global Moderator
    • Hero Member
    • *****
    • Thank You
    • -Given: 4716
    • -Receive: 6590
    • Poruke: 2532
    • Ugled: +7416/-0
    • Pol: Muškarac
    • elektronske cigarete
    Odg: BetterJoy ( SME ) - firmware for Joyetech, Wismec, Eleaf
    « Odgovor #1 poslato: Januar 06, 2018, 12:41:02 »
  • Publish


  • https://github.com/MicroSur/sur_myevic/blob/master/README_ru.md

    Supported devices:

    • Joyetech

      •   eVic VTC Mini
      •   eVic VTC Dual
      •   eVic VTwo Mini
      •   eVic VTwo
      •   eVic AIO
      •   eVic Basic
      •   eGrip II / Light
      •   Cuboid
      •   Cuboid Mini
      •   Cuboid 200
      •   Evic Primo v1 / v2
      •   Evic Primo mini
      •   Evic Primo SE
    •   Wismec

      •   Presa TC75W
      •   Presa TC100W
      •   Reuleaux RX75
      •   Reuleaux RX200S
      •   Reuleaux RX2 / 3
      •   Reuleaux RXmini
      •   Reuleaux RX300
      •   Sinuous (Predator) 228W
      •   Reuleaux RX Gen3
      •   RX2 20700
      •   Sinuous P80
      •   Sinuous FJ200 (without charge support, if the battery is less than 2.5 volts)
    •   Eleaf

      •   Invoke
    •   Other manufacturers

      •   Vaponaute La Petite Box
    Differences from other firmwar:
    Differences from Sur Myevic
      - When steaming, the TC is updated regularly, and not once every 2 seconds. - Removed the packman, the tightening slider.
      - Reduced the delay in triggering the Fire trigger from 60 to 10 ms.
      - The brightness is adjusted not in steps of 2%, but in 1/3.  (0-33-66-100  .  The brightness changes quickly and any button (+ -) can specify any value
      - Replace the keys + - moved to the Interface section
      - Added exit point from Prehit
      - Optimized control (reduced delays, long press of Fire not 2, but 0.5 seconds, details in the instruction)
      - The interface (main screen) is more like ArcticFox
      - Many other interface improvements
      - When the traction time is displayed, the screen does not freeze, and in the TC mode it shows the live temperature
      Difference from ArcticFox
      Support for keyboard shortcuts + -Fire (thanks to MicroSur)
      -Easy stealth - the screen goes out not immediately when you press Fire, and after the screen is extinguished
      -Base firmware is much more functional than AF, but they need to be modified.  There are games, ByPass mode, a lot of other possibilities


    Vise ovde: http://www.ecigtalk.ru/forum/f16/t101158.html


     
    « Poslednja izmena: Februar 13, 2018, 19:12:27 ivanneko »

    Na mreži ivanneko

    • Global Moderator
    • Hero Member
    • *****
    • Thank You
    • -Given: 7850
    • -Receive: 10499
    • Poruke: 7009
    • Ugled: +12934/-0
    • Pol: Muškarac
    Odg: BetterJoy ( SME ) - firmware for Joyetech, Wismec, Eleaf
    « Odgovor #2 poslato: Januar 09, 2018, 01:50:56 »
  • Publish
  • Dobra fora kada vam ne radi displej na modu a ujedno mozete pratiti uzivo i nesto od parametara ..


    Cekaj stani , znaci uzmem saksiju probusim rupu na njoj i ja sam moder ? Ali rupu na saksiji nisam ja izmislio znaci li onda da sam cloner ? :D

    Van mreže Điva

    • eCiginfo prijatelj
    • Hero Member
    • *****
    • Thank You
    • -Given: 970
    • -Receive: 1158
    • Poruke: 1340
    • Ugled: +1451/-0
    • Pol: Muškarac
    Odg: SME (myevic) - firmware for Joyetech, Wismec, Eleaf
    « Odgovor #3 poslato: Maj 05, 2018, 18:27:01 »
  • Publish
  • Ovo je poseban program (updater), ili Joyetech -ov?
    Odakle mogu skinuti zadnji, najnoviji myevic .bin fajl?


    Sony Xperia ZR

    Na mreži ivanneko

    • Global Moderator
    • Hero Member
    • *****
    • Thank You
    • -Given: 7850
    • -Receive: 10499
    • Poruke: 7009
    • Ugled: +12934/-0
    • Pol: Muškarac
    Odg: SME (myevic) - firmware for Joyetech, Wismec, Eleaf
    « Odgovor #4 poslato: Maj 05, 2018, 19:55:51 »
  • Publish
  • Poseban , FWUpdater v2.2.0 skinuti odavde ..
    BIN fajl ( ovaj nisam testirao )..
    Cekaj stani , znaci uzmem saksiju probusim rupu na njoj i ja sam moder ? Ali rupu na saksiji nisam ja izmislio znaci li onda da sam cloner ? :D

    Na mreži ivanneko

    • Global Moderator
    • Hero Member
    • *****
    • Thank You
    • -Given: 7850
    • -Receive: 10499
    • Poruke: 7009
    • Ugled: +12934/-0
    • Pol: Muškarac
    Odg: SME (myevic) - firmware for Joyetech, Wismec, Eleaf
    « Odgovor #5 poslato: Avgust 16, 2018, 12:20:31 »
  • Publish
  • Cekaj stani , znaci uzmem saksiju probusim rupu na njoj i ja sam moder ? Ali rupu na saksiji nisam ja izmislio znaci li onda da sam cloner ? :D

    Na mreži ivanneko

    • Global Moderator
    • Hero Member
    • *****
    • Thank You
    • -Given: 7850
    • -Receive: 10499
    • Poruke: 7009
    • Ugled: +12934/-0
    • Pol: Muškarac
    Odg: SME (myevic) - firmware for Joyetech, Wismec, Eleaf
    « Odgovor #6 poslato: Oktobar 31, 2018, 00:12:25 »
  • Publish
  • U poslednje vreme dodate neke od opcija a meni je posebno zanimljiva REPLAY...
             
             Main Features:allowable resistance from 0.05 Ohm in all modes.
    • Repeat mode (replay) - simple replacement of the thermal control operation in the Power mode.
    • Profiles to save different settings and quickly apply them.
    • more configurable window-change timeouts.
    • heating curves, smart preheating in Power, various heating algorithms in thermal control.
    • the reaction time for a combination of buttons is shortened.
    • there is no automatic power-down with a weak battery charge. It's honest.
    • Varivolt mode, when the voltage does not change during the soaring.
    • safety: stop fire, and then turn off the mode, if the fire button is pressed longer than the set hover cutoff.
    • USB charge disconnection during overtemperature (for 2+ battery modes).
    • automatic shutdown mode after reaching the user specified number of puffs or the operating time of the mod.
    • in the information line, you can choose to display a set of important information, not just puffs and amps.
    • in the first interface of the screen an additional information line is added, for greater clarity.
    • the second screen mode, where the power and resistance lines are shown in large font.
    • a short-time display of clocks in the off mode.
    • turn off/on the charging screen of the mod by the minus button. Timeouts of the charging screen display.
    • setting maximum values power, voltage, temperature, charging current (for 2+ battery modes), number of batteries for bypass.
    • adjust the screen flip during tightening.
    • smart screen inversion, does not show empty white screens.
    • correction of the board temperature and determination of the resistance of the atomizer.
    • more accurate display of resistance in idle time to the third sign.
    • edit your battery profile from the mod menu.
    • Reset resistance to the real current, without twisting the atomizer.
    • setting the initial temperature of the resistance blocking for the thermal control mode, not only 20 degrees.
    • selection for graphical display of all 1-2-3-4 batteries, percentage and voltage to choose from.
    • Autofire. Hover with the specified tightening time without constant holding down the Start button. Infinite autofire.
    • reset all counters at once; reset resetting counters if a fresh battery is inserted, or the battery is charged in box-fashion itself.
    • counters of evaporated liquid and expended energy. The counter evaporated per day is reset automatically at midnight. Set the reset at midnight to other counters.
    • a lot of options for animation 3D screensavers. Support for logos 64x40, 64x48.
    • press plus button for information why mod is in off state.
    • games Tetris and Flappy Bird for fun.
    Objasnjenje samo na ruskom:

    Repeat ( повтор, реплей )
    Заменяет режим термоконтроля на более простой в вариватте.Только для спиралей из материалов для термоконтроля.
        
             установив эту галочку, переходим в режим POWER и, подбирая мощность, делаете затяжки, пока Вас не устроит результат.

    • последнее сопротивление нагретой спирали и выставленная мощность сохраняются.
    • что бы повторить эту затяжку (реплей), нужно заблокировать кнопки (+-), удерживая их.
    • при следующих затяжках запомненное сопротивление нагретого койла будет поддерживаться постоянным ( как температура в режимах термоконтроля ).
    Для индикации режима справа от числа мощности будет гореть буква "r". Если материал спирали не подходит, парение в режиме повтора может быть остановлено и режим выключен автоматически.

    Napravili su ga mozda i po mom uputstvu  :098:  TEST




    Potrebno instaliratii najnoviji firmver myevic.bin
    Cekaj stani , znaci uzmem saksiju probusim rupu na njoj i ja sam moder ? Ali rupu na saksiji nisam ja izmislio znaci li onda da sam cloner ? :D