Autor Tema: Esmokeguru Skufall RDA  (Pročitano 1163 puta)

Van mreže bobpp

  • Global Moderator
  • Hero Member
  • *****
  • Thank You
  • -Given: 5026
  • -Receive: 7515
  • Poruke: 2911
  • Ugled: +8341/-0
  • Pol: Muškarac
  • elektronske cigarete
Esmokeguru Skufall RDA
« poslato: Maj 13, 2018, 19:47:56 »
  • Publish
  • Ko kaze da airdisc ne moze da se napravi od SS i bez oringa? Ali kutija mi se svidja... ;D

     Dimensions
    a. 22mm diameter
    b. 19.2mm Height.
    c. 4.6mm well depth
    d. Squonk hole raised about 2mm from deck and sloped
    e. Drip Tip 6.7mm bore and 7mm height made from Delrin as is black insert.
     
    Construction
    All Metal Parts are made from Stainless Steel 316L (1.4404)
    Insulators made from Ketron Peek Quadrant Foodgrade (High Temp)
    upper cap insert from PC1000 The PC1000 Polycarbonate is Food grade and hand polished
    O-rings are NBR Shore 50 Food grade and FDA approved (shore 50 means they are very soft)
    Screws are made from 316 Stainless Steel.
    Presentation Box is Handmade and from beech wood.
    Materials Stainless Steel comes only from Europe (Germany, Italy, Spain, France)
    All Parts are made in Greece.
    All Stainless-Steel Parts are hand polished.
    All parts are professional cleaned from us with Ultrasonic,
    after that all parts come in distilled water.
     
    Warranty
    2 years.
     
    Air Disc sizes
    a. Without airdisc 7.5 x 3.4mm
    b. MTL – 1mm – coil space 5.9mm
    c. Middle – 3x 1.6mm – coil space 7.7mm
    d. Large – 3 x 1.9mm – coil space 7.7mm| 복제된 문서입니다. (원본) http://vapekhan.com/4280052


    Cena 160e, airdiskovi 19e